Skip to main content
Skip to main content
Product title:

Quadra-Fire 18" Loop Igniter Heating Element (380 Watts): SRV7000-462-AMP

Product rating:
Product price:
$29.99

A $50.00 Savings over the OEM

Product SKU ! SRV7000-462-AMP
Product MPN ! SRV7000-462
Product availability: In Stock
Bullet point features

Description

This is the 380-watt replacement igniter for most Quadrafire pellet stoves and inserts made from 2006 forward. Check the compatibility tab for models.

NOTE: The Mt. Vernon AE, Mt. Vernon E2, and the Edge 60 which were originally all designed to use this igniter but the igniter for these models was redesigned in 2008 which became part SRV7000-647. That is igniter is 300 Watts and was redesigned use less power, add more life to the part but requires a slightly longer ignition cycle than the previous igniter.


Replacement For Part Numbers:

  • SRV7000-462
  • SRV7000-226
  • 7001-226
  • 7000-020

View Compatible Models

UPC: 652174521470

Compatible Models

    Quadra-Fire

  • 800 F/S Nova
  • CAB50-C
  • Castile F/S
  • Castile FS MBK
  • Castile Insert
  • Classic Bay 1200
  • Classic Bay 1200-I
  • Contour
  • Edge 60
  • Mt Vernon AE Insert
  • Mt Vernon AE
  • Mt Vernon E2i
  • Mt Vernon
  • Santa Fe B
  • Santa Fe MBK
  • Santa Fe
  • Santa Fe-C INS

Technical Specs

Length 4 3/8"
Watts 380
Connectors QTY 2 Male 1/4" Spade
Wire Length 18"

Videos

Instructions

Install Instructions For Quadra-Fire 18" Loop Igniter Heating Element (380 Watts): SRV7000-462-AMP

Follow proper shutdown procedures before attempting any work on your stove and unplug the unit once the stove has cooled.

  1. To access the igniter you will need to remove the ash drawer/pan
  2. The wire leads to the igniter are connected to the wire harness with 1/4 inch male / female spade connectors. These wires will pull forward approximately 4 to 5 inches (102 to127mm). Disconnect the spade connectors and remove the igniter from the chamber. Loosen the thumb screw and slide igniter out. Some older models may have a different style mounting screw.
  3. Install new igniter into the chamber and tighten the thumb screw. Re-connect the wires to the 2 leads with the spade connectors.
  4. Remove right side panel (if necessary) and pull wire leads back toward the rear of the appliance to take-up the 4 to 5 inches (102 to 127mm) previously pulled out. This will keep the wires out of the way of the ash drawer/pan. Double check that the igniter wires are clear of any movement, i.e. ash drawer/pan, fire pot cleaning rod, etc.
  5. Re-install the ash drawer/pan and side panel (if removed) and re-connect the power.

Troubleshooting

Troubleshooting Manual for the Mt Vernon AE

Items to check:

  1. Check the igniter(SRV7000-462): *Check for continuity in the igniter (should get around 36 ohms) or apply direct power to it. (This is an AC component)
  2. Check the AC power supply harness (#7034-220): *Check for power or a broken connection.
  3. Check for power at the igniter harness (SRV7034-199): *Make sure all connections are good. *Check for continuity in the wire harness.
  4. Check for power at the control board (SRV7000-456): *Unplug the unit and restart. Make sure the wall control says “Startup”. *If power is not present, check the fuse or replace the control board.

NOTE: There is a 20mm 5 AMP fuse for the ignition circuit located inside the plastic shield of the mother board.


It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

This is the 380-watt replacement igniter for most Quadrafire pellet stoves and inserts made from 2006 forward. Check the compatibility tab for models.

NOTE: The Mt. Vernon AE, Mt. Vernon E2, and the Edge 60 which were originally all designed to use this igniter but the igniter for these models was redesigned in 2008 which became part SRV7000-647. That is igniter is 300 Watts and was redesigned use less power, add more life to the part but requires a slightly longer ignition cycle than the previous igniter.


Replacement For Part Numbers:

  • SRV7000-462
  • SRV7000-226
  • 7001-226
  • 7000-020

View Compatible Models

UPC: 652174521470

Compatible Models

    Quadra-Fire

  • 800 F/S Nova
  • CAB50-C
  • Castile F/S
  • Castile FS MBK
  • Castile Insert
  • Classic Bay 1200
  • Classic Bay 1200-I
  • Contour
  • Edge 60
  • Mt Vernon AE Insert
  • Mt Vernon AE
  • Mt Vernon E2i
  • Mt Vernon
  • Santa Fe B
  • Santa Fe MBK
  • Santa Fe
  • Santa Fe-C INS

Technical Specs

Length 4 3/8"
Watts 380
Connectors QTY 2 Male 1/4" Spade
Wire Length 18"

Instructions

Assembly Instructions For Quadra-Fire 18" Loop Igniter Heating Element (380 Watts): SRV7000-462-AMP

Follow proper shutdown procedures before attempting any work on your stove and unplug the unit once the stove has cooled.

  1. To access the igniter you will need to remove the ash drawer/pan
  2. The wire leads to the igniter are connected to the wire harness with 1/4 inch male / female spade connectors. These wires will pull forward approximately 4 to 5 inches (102 to127mm). Disconnect the spade connectors and remove the igniter from the chamber. Loosen the thumb screw and slide igniter out. Some older models may have a different style mounting screw.
  3. Install new igniter into the chamber and tighten the thumb screw. Re-connect the wires to the 2 leads with the spade connectors.
  4. Remove right side panel (if necessary) and pull wire leads back toward the rear of the appliance to take-up the 4 to 5 inches (102 to 127mm) previously pulled out. This will keep the wires out of the way of the ash drawer/pan. Double check that the igniter wires are clear of any movement, i.e. ash drawer/pan, fire pot cleaning rod, etc.
  5. Re-install the ash drawer/pan and side panel (if removed) and re-connect the power.

Troubleshooting

Troubleshooting Manual for the Mt Vernon AE

Items to check:

  1. Check the igniter(SRV7000-462): *Check for continuity in the igniter (should get around 36 ohms) or apply direct power to it. (This is an AC component)
  2. Check the AC power supply harness (#7034-220): *Check for power or a broken connection.
  3. Check for power at the igniter harness (SRV7034-199): *Make sure all connections are good. *Check for continuity in the wire harness.
  4. Check for power at the control board (SRV7000-456): *Unplug the unit and restart. Make sure the wall control says “Startup”. *If power is not present, check the fuse or replace the control board.

NOTE: There is a 20mm 5 AMP fuse for the ignition circuit located inside the plastic shield of the mother board.


It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 87 reviews
94%
(82)
6%
(5)
0%
(0)
0%
(0)
0%
(0)
R
Robert W.
Reliable

Have ordered several parts from this site. They have had everything I needed, at decent prices. Fast shipping.

R
Robin B.
Great experience!

Ordering online was easy, cheapest price I found and received the product with in days of ordering! will always use this site for my stove needs

C
Chester S.
heat

it works fine great service thanks

D
DANIEL H.

Heatilator Eco Choice 18" Loop Igniter Heating Element 380 Watts , SRV7000-462-AMP

R
Ricky T.
Heating element

Used there web sight to review the stove manual diagnos the problem, bought a heating element installed it problem solved.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question
  • do you ship to canada

    Yes

Customer Reviews

Based on 87 reviews
94%
(82)
6%
(5)
0%
(0)
0%
(0)
0%
(0)
R
Robert W.
Reliable

Have ordered several parts from this site. They have had everything I needed, at decent prices. Fast shipping.

R
Robin B.
Great experience!

Ordering online was easy, cheapest price I found and received the product with in days of ordering! will always use this site for my stove needs

C
Chester S.
heat

it works fine great service thanks

D
DANIEL H.

Heatilator Eco Choice 18" Loop Igniter Heating Element 380 Watts , SRV7000-462-AMP

R
Ricky T.
Heating element

Used there web sight to review the stove manual diagnos the problem, bought a heating element installed it problem solved.