Skip to main content
Skip to main content
Product title:

Quadra-Fire Feed Motor Assembly: 812-4760-AMP

Product rating:
Product price:
$249.99

A $200.00 Savings over the OEM

Product SKU ! 812-4760-AMP
Product MPN ! 812-4760
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $279.98

Description

This Quadra-Fire feed motor assembly is used on all models variations for the Castile, Sante Fe, Santa Fe Insert, Mt Vernon Stove (Pre AE) and, the  Contour.

This assembly is also used for the Castile Insert-B and the Castile Insert-C made between 2011-2019.

This whole assembly is a compatible fit for all of the stoves we just listed when it is installed completely as a whole assembly.

This assembly has updates to the bearing and the motor bracket which ARE NOT COMPATIBLE with older feed assembly parts.

This assembly includes the following parts:

  • 4 x 8-32 x 3/8'' Black Oxide Screws (Screw-3)
  • 1 x 2.4 RPM Auger Feed Motor (812-4421)
  • 1 x 7/8'' Auger Collar with Set Screw (229-0520)
  • 1 x  Nylon Auger Bearing (SRV7000-598)
  • 1 x  Feed Motor Bracket (7001-039)
  • 1 x  Feed Motor Gasket (SRV240-0731)
  • 1 x Feed Spring / Auger Shaft 14.5'' (SRV7001-046) 

This assembly includes the following parts:


**NOTES**


  • Final bearing height adjustment is required by the installer, instructions included. Download PDF
  • Castile Insert - This is the correct feed assembly for the CASTILE INSERT-B and CASTILE INSERT-C, which were made between Feb 2011-2019. Older models made from 2002-March 2011 use feed assembly SRV414-5400.
  • The Mt Vernon E2 models use feed assembly part, SRV7080-010
  • The Mt Vernon AE models use feed assembly part, SRV7034-004


Replacement For Part Number:

  • 812-4760

UPC: 652174168316

Compatible Models

    Quadra-Fire

  • Castile F/S
  • Castile FS MBK
  • Contour
  • Mt Vernon
  • Santa Fe B
  • Santa Fe MBK
  • Santa Fe
  • Santa Fe-C INS

Technical Specs

Nominal Spring Length 14 1/2"
RPM 2.4
Direction CW
Amps 1
Volts 115/120
Connector 3-PIN Molex

Videos

Instructions

Install Instructions For Quadra-Fire Feed Motor Assembly: 812-4760-AMP

Feed Motor Assembly Instructions for various models PDF

Adjusting the Feed Spring Bearing Height for Various Models PDF

Troubleshooting

The feed system is located behind the firebox and can be removed as an entire assembly. The assembly includes the feed motor, mounting bracket, bearing and feed spring (auger). The hollow feed spring (auger) pulls pellets up the feed tube from the hopper area and drops them down the feed chute into the fire pot at a set rate. The feed motor turns for 7 seconds at each feed interval. The amount of pellets fed into the stove is dictated by the OFF cycle. More pellets = more frequent intervals.

What to check if the unit is NOT feeding pellets:

  • Snap Disc #2 malfunctioned
  • Vacuum switch is not closing
  • Hopper lid switch (if equipped) is not aligned
  • Vacuum switch hose is clogged at feed tube
  • Capacitor on motor is too close to heat source or is defective
  • Bad control box

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

This Quadra-Fire feed motor assembly is used on all models variations for the Castile, Sante Fe, Santa Fe Insert, Mt Vernon Stove (Pre AE) and, the  Contour.

This assembly is also used for the Castile Insert-B and the Castile Insert-C made between 2011-2019.

This whole assembly is a compatible fit for all of the stoves we just listed when it is installed completely as a whole assembly.

This assembly has updates to the bearing and the motor bracket which ARE NOT COMPATIBLE with older feed assembly parts.

This assembly includes the following parts:

  • 4 x 8-32 x 3/8'' Black Oxide Screws (Screw-3)
  • 1 x 2.4 RPM Auger Feed Motor (812-4421)
  • 1 x 7/8'' Auger Collar with Set Screw (229-0520)
  • 1 x  Nylon Auger Bearing (SRV7000-598)
  • 1 x  Feed Motor Bracket (7001-039)
  • 1 x  Feed Motor Gasket (SRV240-0731)
  • 1 x Feed Spring / Auger Shaft 14.5'' (SRV7001-046) 

This assembly includes the following parts:


**NOTES**


  • Final bearing height adjustment is required by the installer, instructions included. Download PDF
  • Castile Insert - This is the correct feed assembly for the CASTILE INSERT-B and CASTILE INSERT-C, which were made between Feb 2011-2019. Older models made from 2002-March 2011 use feed assembly SRV414-5400.
  • The Mt Vernon E2 models use feed assembly part, SRV7080-010
  • The Mt Vernon AE models use feed assembly part, SRV7034-004


Replacement For Part Number:

  • 812-4760

UPC: 652174168316

Technical Specs

Nominal Spring Length 14 1/2"
RPM 2.4
Direction CW
Amps 1
Volts 115/120
Connector 3-PIN Molex

Troubleshooting

The feed system is located behind the firebox and can be removed as an entire assembly. The assembly includes the feed motor, mounting bracket, bearing and feed spring (auger). The hollow feed spring (auger) pulls pellets up the feed tube from the hopper area and drops them down the feed chute into the fire pot at a set rate. The feed motor turns for 7 seconds at each feed interval. The amount of pellets fed into the stove is dictated by the OFF cycle. More pellets = more frequent intervals.

What to check if the unit is NOT feeding pellets:

  • Snap Disc #2 malfunctioned
  • Vacuum switch is not closing
  • Hopper lid switch (if equipped) is not aligned
  • Vacuum switch hose is clogged at feed tube
  • Capacitor on motor is too close to heat source or is defective
  • Bad control box

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jamie B.
Feed Motor Assembly

Exactly what I needed. Back up and running right away!

R
Richard K.
pellet stove backup parts

I have used this parts company numerous times in the past always with excellent service and quick delivery times. Most recent order arrived with a very expensive part missing. I sent them an email describing the missing part and the very next day my part was in the mail to me. They never asked for some sort of proof, just acted quickly to resolve the issue. A very pleased and satisfied customer.

D
Daniel R.
Great Company

I was concerned the feed assembly. Wouldn’t fit my stove . The feed bearing is now nylon instead of steel. E-mailed stove and grill and got immediate responses. Gabe and Mandy got me the directions and assured me it was the right part. Great customer service. Part fit perfect will be going to Stove and Grille for all my stove needs .

J
JoAnn G.
Thank you

The part worked great. Thank you!

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jamie B.
Feed Motor Assembly

Exactly what I needed. Back up and running right away!

R
Richard K.
pellet stove backup parts

I have used this parts company numerous times in the past always with excellent service and quick delivery times. Most recent order arrived with a very expensive part missing. I sent them an email describing the missing part and the very next day my part was in the mail to me. They never asked for some sort of proof, just acted quickly to resolve the issue. A very pleased and satisfied customer.

D
Daniel R.
Great Company

I was concerned the feed assembly. Wouldn’t fit my stove . The feed bearing is now nylon instead of steel. E-mailed stove and grill and got immediate responses. Gabe and Mandy got me the directions and assured me it was the right part. Great customer service. Part fit perfect will be going to Stove and Grille for all my stove needs .

J
JoAnn G.
Thank you

The part worked great. Thank you!