Skip to main content
Skip to main content
Product title:

Quadra-Fire Loop Igniter (300 watt): SRV7000-647-OEM

Product rating:
Product price:
$49.99
Product SKU ! SRV7000-647
Product MPN ! SRV7000-647
Product availability: In Stock
Bullet point features

Frequently Bought Together

Description

This is the updated 300-watt replacement igniter for Mt Vernon AE Stoves and Inserts and is also the standard igniter used in the Mt Vernon E2 and the Trekker series stoves and inserts.

Technical Bulletin - October 2011- A new service part igniter is currently available for Advanced Energy units (AE) in which the consumer burns pellet fuel only. This igniter is 300 watts, so it will stay cooler and last longer than the current 380 watt igniter, but it will not light other biomass fuels. Although all igniters do burn out, you will see improved performance with the 300 watt igniter. This igniter should not be used in any non-AE units. The part number for the 300 watt igniter is SRV7000-647. For consumers who prefer to maintain full multi-fuel functionality, replace a burned out igniter with the existing 380 watt igniter, part SRV7000-462. New units of the Mt. Vernon AE were ALWAYS shipped with the multi-fuel 380 watt igniter, even after the update. This new igniter is a service part option ONLY. The AE service firepot assembly (SRV7034- 072) is now replaced with SRV7034-072B. This new service firepot assembly is identical to the previous assembly, except the igniter will no longer be included.


Replacement For Part Number:

  • SRV7000-647

View Compatible Models

UPC: 652174636990

Compatible Models

    Quadra-Fire

  • Edge 60
  • Mt Vernon AE Insert
  • Mt Vernon AE
  • Mt Vernon E2 FS
  • Trekker Insert
  • Trekker

Technical Specs

Watts 300
Element Length 4 3/8"
Wire Length 18"
Width 3/4″
Rod Diameter 1/4″
Connectors 2 Male 1/4" Spades

Instructions

Install Instructions For Quadra-Fire Loop Igniter (300 watt): SRV7000-647-OEM

Follow proper shutdown procedures before attempting any work on your stove and unplug the unit once the stove has cooled.


  1. To access the igniter you will need to remove the ash drawer/pan
  2. The wire leads to the igniter are connected to the wire harness with 1/4 inch male / female spade connectors. These wires will pull forward approximately 4 to 5 inches (102 to127mm). Disconnect the spade connectors and remove the igniter from the chamber. Loosen the thumb screw and slide igniter out. Some older models may have a different style mounting screw.
  3. Install new igniter into the chamber and tighten the thumb screw. Re-connect the wires to the 2 leads with the spade connectors.
  4. Remove right side panel (if necessary) and pull wire leads back toward the rear of the appliance to take-up the 4 to 5 inches (102 to 127mm) previously pulled out. This will keep the wires out of the way of the ash drawer/pan. Double check that the igniter wires are clear of any movement, i.e. ash drawer/pan, fire pot cleaning rod, etc.
  5. Re-install the ash drawer/pan and side panel (if removed) and re-connect the power.


Troubleshooting

Troubleshooting Manual for the Mt Vernon AE

Items to check:

  1. Check the igniter(SRV7000-462): *Check for continuity in the igniter (should get around 36 ohms) or apply direct power to it. (This is an AC component)
  2. Check the AC power supply harness (#7034-220): *Check for power or a broken connection.
  3. Check for power at the igniter harness (SRV7034-199): *Make sure all connections are good. *Check for continuity in the wire harness.
  4. Check for power at the control board (SRV7000-456): *Unplug the unit and restart. Make sure the wall control says “Startup”. *If power is not present, check the fuse or replace the control board.

NOTE: There is a 20mm 5 AMP fuse for the ignition circuit located inside the plastic shield of the mother board.


It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

This is the updated 300-watt replacement igniter for Mt Vernon AE Stoves and Inserts and is also the standard igniter used in the Mt Vernon E2 and the Trekker series stoves and inserts.

Technical Bulletin - October 2011- A new service part igniter is currently available for Advanced Energy units (AE) in which the consumer burns pellet fuel only. This igniter is 300 watts, so it will stay cooler and last longer than the current 380 watt igniter, but it will not light other biomass fuels. Although all igniters do burn out, you will see improved performance with the 300 watt igniter. This igniter should not be used in any non-AE units. The part number for the 300 watt igniter is SRV7000-647. For consumers who prefer to maintain full multi-fuel functionality, replace a burned out igniter with the existing 380 watt igniter, part SRV7000-462. New units of the Mt. Vernon AE were ALWAYS shipped with the multi-fuel 380 watt igniter, even after the update. This new igniter is a service part option ONLY. The AE service firepot assembly (SRV7034- 072) is now replaced with SRV7034-072B. This new service firepot assembly is identical to the previous assembly, except the igniter will no longer be included.


Replacement For Part Number:

  • SRV7000-647

View Compatible Models

UPC: 652174636990

Technical Specs

Watts 300
Element Length 4 3/8"
Wire Length 18"
Width 3/4″
Rod Diameter 1/4″
Connectors 2 Male 1/4" Spades

Instructions

Install Instructions For Quadra-Fire Loop Igniter (300 watt): SRV7000-647-OEM

Follow proper shutdown procedures before attempting any work on your stove and unplug the unit once the stove has cooled.


  1. To access the igniter you will need to remove the ash drawer/pan
  2. The wire leads to the igniter are connected to the wire harness with 1/4 inch male / female spade connectors. These wires will pull forward approximately 4 to 5 inches (102 to127mm). Disconnect the spade connectors and remove the igniter from the chamber. Loosen the thumb screw and slide igniter out. Some older models may have a different style mounting screw.
  3. Install new igniter into the chamber and tighten the thumb screw. Re-connect the wires to the 2 leads with the spade connectors.
  4. Remove right side panel (if necessary) and pull wire leads back toward the rear of the appliance to take-up the 4 to 5 inches (102 to 127mm) previously pulled out. This will keep the wires out of the way of the ash drawer/pan. Double check that the igniter wires are clear of any movement, i.e. ash drawer/pan, fire pot cleaning rod, etc.
  5. Re-install the ash drawer/pan and side panel (if removed) and re-connect the power.


Troubleshooting

Troubleshooting Manual for the Mt Vernon AE

Items to check:

  1. Check the igniter(SRV7000-462): *Check for continuity in the igniter (should get around 36 ohms) or apply direct power to it. (This is an AC component)
  2. Check the AC power supply harness (#7034-220): *Check for power or a broken connection.
  3. Check for power at the igniter harness (SRV7034-199): *Make sure all connections are good. *Check for continuity in the wire harness.
  4. Check for power at the control board (SRV7000-456): *Unplug the unit and restart. Make sure the wall control says “Startup”. *If power is not present, check the fuse or replace the control board.

NOTE: There is a 20mm 5 AMP fuse for the ignition circuit located inside the plastic shield of the mother board.


It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 11 reviews
91%
(10)
9%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Ann W.
This is the go to for oem pellet stove parts

Needed a new igniter for my quadrafire and finding one that was not oem was easy but they don’t hold up, I was happy to find one with Stove and Grill Parts for Less and the shipping was super fast which I greatly appreciated because the weather had turned very cold. Replaced the igniter and viole we have heat.

E
Eric R.
Exactly what I needed. Thank you.

Fast and easy transaction. Correct part as advertised. Will definitely buy from here again. Thank you.

F
FRED S.
Themostat

Good service. Product was delivered on time and quick. Thank You

M
Michael H.
Parts

Great

B
Butch L.
igniter

It was exc.went in easy and ignited right off.

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question

  • is this the same as the Mt Vernon E2 igniter?

    According to the manual for the Quadra-fire Mt Vernon E2 pellet stove the correct replacement ignitor is SRV7000-647.

Customer Reviews

Based on 11 reviews
91%
(10)
9%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Ann W.
This is the go to for oem pellet stove parts

Needed a new igniter for my quadrafire and finding one that was not oem was easy but they don’t hold up, I was happy to find one with Stove and Grill Parts for Less and the shipping was super fast which I greatly appreciated because the weather had turned very cold. Replaced the igniter and viole we have heat.

E
Eric R.
Exactly what I needed. Thank you.

Fast and easy transaction. Correct part as advertised. Will definitely buy from here again. Thank you.

F
FRED S.
Themostat

Good service. Product was delivered on time and quick. Thank You

M
Michael H.
Parts

Great

B
Butch L.
igniter

It was exc.went in easy and ignited right off.

123
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid