Skip to main content
Skip to main content
Product title:

Quadra-Fire Castile Insert Feed Motor Assembly: SRV414-5400-AMP

Product rating:
Product price:
$229.99
Product SKU ! SRV414-5400-AMP
Product MPN ! SRV414-5400
Product availability: In Stock
Bullet point features

Frequently Bought Together

Description

This is a complete auger feed motor assembly for the Quadra-Fire Castile Insert made between Jan 2002 and May 2011.

This whole assembly is a compatible fit for Castile Insert, Gen. 1, 2002-2005, and the Castile Insert Gen 2, 2006-2011 when it is installed completely as a whole assembly.

This assembly has updates to the bearing and the motor bracket which ARE NOT COMPATIBLE with older feed assembly parts.

812-4421

This assembly includes the following parts:


  • 1 x Feed Motor (812-4421)
  • 4 x 8-32 X 3/8'' Phillips Screws (225-0500)
  • 1 x 7/8" Lock Collar (229-0520)
  • 1 x Nylon Bearing (SRV7000-598)
  • 1 x Motor Bracket (7001-039)
  • 1 x Feed Motor Gasket (SRV240-0731)
  • 1 x Feed Spring Assembly (SRV414-5540)
  • 1 x Shaft Set Screw (225-0550) 


This kit uses aftermarket parts where applicable to help you save big!


**NOTES**


  • Final bearing height adjustment is required by the installer, instructions included. Download PDF
  • This is the correct feed assembly for the CASTILE INSERT made between 2002 - March 2011. All newer models, Castile Insert-B and Castile Insert-C made from 2011 through the current 2021 model use feed assembly 812-4760.


Replacement For Part Numbers:

  • SRV414-5400
  • 414-5400

View Compatible Models

UPC: 652174611706

Compatible Models

    Quadra-Fire

  • Castile Insert

Technical Specs

Spring Auger Depth 14"
RPM 2.4
Direction Normally CW
Volts 115/120v
Amps 1
Connector 3-PIN Molex

Instructions

Install Instructions For Quadra-Fire Castile Insert Feed Motor Assembly: SRV414-5400-AMP

Feed Motor Assembly Instructions for various models PDF

Adjusting the Feed Spring Bearing Height for Various Models PDF

Troubleshooting

The feed system is located behind the firebox and can be removed as an entire assembly. The assembly includes the feed motor, mounting bracket, bearing and feed spring (auger). The hollow feed spring (auger) pulls pellets up the feed tube from the hopper area and drops them down the feed chute into the fire pot at a set rate. The feed motor turns for 7 seconds at each feed interval. The amount of pellets fed into the stove is dictated by the OFF cycle. More pellets = more frequent intervals.

What to check if the unit is NOT feeding pellets:

  • Snap Disc #2 malfunctioned
  • Vacuum switch is not closing
  • Hopper lid switch (if equipped) is not aligned
  • Vacuum switch hose is clogged at feed tube
  • Capacitor on motor is too close to heat source or is defective
  • Bad control box



Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

This is a complete auger feed motor assembly for the Quadra-Fire Castile Insert made between Jan 2002 and May 2011.

This whole assembly is a compatible fit for Castile Insert, Gen. 1, 2002-2005, and the Castile Insert Gen 2, 2006-2011 when it is installed completely as a whole assembly.

This assembly has updates to the bearing and the motor bracket which ARE NOT COMPATIBLE with older feed assembly parts.

812-4421

This assembly includes the following parts:


  • 1 x Feed Motor (812-4421)
  • 4 x 8-32 X 3/8'' Phillips Screws (225-0500)
  • 1 x 7/8" Lock Collar (229-0520)
  • 1 x Nylon Bearing (SRV7000-598)
  • 1 x Motor Bracket (7001-039)
  • 1 x Feed Motor Gasket (SRV240-0731)
  • 1 x Feed Spring Assembly (SRV414-5540)
  • 1 x Shaft Set Screw (225-0550) 


This kit uses aftermarket parts where applicable to help you save big!


**NOTES**


  • Final bearing height adjustment is required by the installer, instructions included. Download PDF
  • This is the correct feed assembly for the CASTILE INSERT made between 2002 - March 2011. All newer models, Castile Insert-B and Castile Insert-C made from 2011 through the current 2021 model use feed assembly 812-4760.


Replacement For Part Numbers:

  • SRV414-5400
  • 414-5400

View Compatible Models

UPC: 652174611706

Technical Specs

Spring Auger Depth 14"
RPM 2.4
Direction Normally CW
Volts 115/120v
Amps 1
Connector 3-PIN Molex

Troubleshooting

The feed system is located behind the firebox and can be removed as an entire assembly. The assembly includes the feed motor, mounting bracket, bearing and feed spring (auger). The hollow feed spring (auger) pulls pellets up the feed tube from the hopper area and drops them down the feed chute into the fire pot at a set rate. The feed motor turns for 7 seconds at each feed interval. The amount of pellets fed into the stove is dictated by the OFF cycle. More pellets = more frequent intervals.

What to check if the unit is NOT feeding pellets:

  • Snap Disc #2 malfunctioned
  • Vacuum switch is not closing
  • Hopper lid switch (if equipped) is not aligned
  • Vacuum switch hose is clogged at feed tube
  • Capacitor on motor is too close to heat source or is defective
  • Bad control box



Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
Pellet s.o.
Worked out well

Very old Quadrafire replacement auger motor was delivered on time. Correct part was sent and installation was a success. ( useful UTube video also helped.}
Have done business with them before and have always been pleased.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
Pellet s.o.
Worked out well

Very old Quadrafire replacement auger motor was delivered on time. Correct part was sent and installation was a success. ( useful UTube video also helped.}
Have done business with them before and have always been pleased.

Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid