Skip to main content
Skip to main content
Product title:

Quadra-Fire Auger Feed Motor Only with Bracket (2.4 RPM): 812-4421

Product rating:
Product price:
$279.99
Product SKU ! 812-4421
Product MPN ! 812-4421
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $324.96

Description

QuadraFire 2.4 RPM feed motor for most pellet stoves and inserts. This part is commonly called an auger motor. Includes the motor, mounting bracket, capacitor bypass wire adaptor (for use on some models made prior to 2006), and instructions.

Older Models made prior to 2006

  • The mounting bracket fits all Quadra-Fire models made after 2011.
  • Some Classic Bay CB1200 and CB1200i Inserts may require using the stove's existing bracket.
  • Castile Inserts made prior to 2011 use a specific motor bracket that has been discontinued. This motor will mount on the old bracket. Over the years, it's possible that mismatched parts were installed or omitted in the feed assembly for these units. If you have a Castile Insert from this time period we highly suggest buying an updated full assembly to avoid compatibility issues.
  • CB1200 and Contour, and Mt Vernon (OM) models still using the gray, opaque control boxes may require the use of the adapter bypass wire included with this motor. If your motor can plug into the existing wiring connection the adapter is not used.

    Note: The Edge60 Built-in and the Mt Vernon AE Pellet Stove/ Insert use a 12 volt auger feed motor, SRV7000-313.


    Complete Quadra-Fire Feed Assemblies with 812-4421 Motor:

    • Castile FS (All models) - 812-4760
    • Castile Insert (2002-March 2011) - SRV414-5400
    • Castile Insert-B, Castile Insert-C (February 2011-May 2019) - 812-4760
    • Classic Bay CB1200, Classic Bay CB1200i Insert - (All models) - 812-3690
    • Santa-Fe, Santa-Fe Insert - (All models) - 812-4760
    • Contour - (All Models) - 812-4760
    • Mt Vernon Stove (OM) (2003-2006) - 812-4760
    • Mt Vernon E2, Mt Vernon E2 Insert - (All models) - SRV7080-010
    • Trekker, Trekker Insert - (2018-Current) - SRV7080-010
    • Quadra-Fire CAB50-C - (2019-Current) - SRV7058-007


    Complete Quadra-Fire Feed Assemblies with SRV7000-313 Motor:



    Replacement For Part Numbers:

    • 812-4421
    • 812-4420
    • 7000-004
    • 12-1020
    • PH-4421

    View Compatible Models

    UPC: 652174208869

    Compatible Models

      Quadra-Fire

    • CAB50-C
    • Castile F/S
    • Castile FS MBK
    • Castile Insert
    • Classic Bay 1200
    • Classic Bay 1200-I
    • Contour
    • Mt Vernon E2 FS
    • Mt Vernon E2i
    • Mt Vernon
    • Santa Fe B
    • Santa Fe MBK
    • Santa Fe
    • Santa Fe-C INS
    • Trekker Insert
    • Trekker

    Technical Specs

    RPM 2.4
    Direction Normally CW
    Volts 115/120
    Shaft 1/4"
    Connector 3 Pin Molex

    Videos

    Instructions

    Install Instructions For Quadra-Fire Auger Feed Motor Only with Bracket (2.4 RPM): 812-4421

    This motor runs on line voltage which will be roughly 115v. The yellow square mounted to the motor assembly is a capacitor, which is used to flip the polarity of the motor if the motor is under strain from a jam. If this happens, the motor will temporarily reverse the spin the auger, freeing the jam, when the capacitor cools, the polarity will be restored to the correct direction and feeding will resume.

    If your stove is not feeding but the motor is turning, you may be turning backwards.

    • the capacitor will reverse polarity if the heat from the stove is warming the capacitor. Make sure the wires are hanging from the proper mounts and not hanging on top of the exhaust blower.
    • When testing the auger, there MUST be at least 1lb of pellets in the hopper to close the pressure switch under normal conditions

    If your stove will not feed:

    1. Unplug the appliance, remove the control box, re-install the control box, and plug the appliance back in. A blue light should blink once to six times. Verify these blinks against your stove and set the program accordingly. See Control Box Programming.
    2. Turn on stove, verify the exhaust blower is "ON"
    3. Turn on the thermostat - the thermostat indicator light should come on and feed cycle should start.
    4. If the feed system does not come on: – Check the vacuum switch – Check the hopper switch (if equipped) - Check the wire harness – Replace #2 snap disc.

    Troubleshooting

    This motor runs on line voltage which will be roughly 115v. The yellow square mounted to the motor assembly is a capacitor, which is used to flip the polarity of the motor if the motor is under strain from a jam. If this happens, the motor will temporarily reverse the spin the auger, freeing the jam, when the capacitor cools, the polarity will be restored to the correct direction and feeding will resume.

    If your stove is not feeding but the motor is turning, you may be turning backwards.

    • the capacitor will reverse polarity if the heat from the stove is warming the capacitor. Make sure the wires are hanging from the proper mounts and not hanging on top of the exhaust blower.
    • When testing the auger, there MUST be at least 1lb of pellets in the hopper to close the pressure switch under normal conditions

    Warranty

    Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

    Shipping Information

    This Item Qualifies For Free Shipping!

    When Will My Order Ship?

    All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

    Do You Offer Express Shipping?

    Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

    How Does Free Shipping Work?

    Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

    Do You Ship To Canada?

    We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

    Do You Ship To Alaska Or Hawaii?

    We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

    Do You Ship Outside The US Or Canada?

    Unfortunately, at this time we do not offer international shipping other than to Canada.

    Shipping Time Estimations

    For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

    Learn More About Our Shipping Information
    Jump back to product information tab navigation

    Description

    QuadraFire 2.4 RPM feed motor for most pellet stoves and inserts. This part is commonly called an auger motor. Includes the motor, mounting bracket, capacitor bypass wire adaptor (for use on some models made prior to 2006), and instructions.

    Older Models made prior to 2006

    • The mounting bracket fits all Quadra-Fire models made after 2011.
    • Some Classic Bay CB1200 and CB1200i Inserts may require using the stove's existing bracket.
    • Castile Inserts made prior to 2011 use a specific motor bracket that has been discontinued. This motor will mount on the old bracket. Over the years, it's possible that mismatched parts were installed or omitted in the feed assembly for these units. If you have a Castile Insert from this time period we highly suggest buying an updated full assembly to avoid compatibility issues.
    • CB1200 and Contour, and Mt Vernon (OM) models still using the gray, opaque control boxes may require the use of the adapter bypass wire included with this motor. If your motor can plug into the existing wiring connection the adapter is not used.

      Note: The Edge60 Built-in and the Mt Vernon AE Pellet Stove/ Insert use a 12 volt auger feed motor, SRV7000-313.


      Complete Quadra-Fire Feed Assemblies with 812-4421 Motor:

      • Castile FS (All models) - 812-4760
      • Castile Insert (2002-March 2011) - SRV414-5400
      • Castile Insert-B, Castile Insert-C (February 2011-May 2019) - 812-4760
      • Classic Bay CB1200, Classic Bay CB1200i Insert - (All models) - 812-3690
      • Santa-Fe, Santa-Fe Insert - (All models) - 812-4760
      • Contour - (All Models) - 812-4760
      • Mt Vernon Stove (OM) (2003-2006) - 812-4760
      • Mt Vernon E2, Mt Vernon E2 Insert - (All models) - SRV7080-010
      • Trekker, Trekker Insert - (2018-Current) - SRV7080-010
      • Quadra-Fire CAB50-C - (2019-Current) - SRV7058-007


      Complete Quadra-Fire Feed Assemblies with SRV7000-313 Motor:



      Replacement For Part Numbers:

      • 812-4421
      • 812-4420
      • 7000-004
      • 12-1020
      • PH-4421

      View Compatible Models

      UPC: 652174208869

      Compatible Models

        Quadra-Fire

      • CAB50-C
      • Castile F/S
      • Castile FS MBK
      • Castile Insert
      • Classic Bay 1200
      • Classic Bay 1200-I
      • Contour
      • Mt Vernon E2 FS
      • Mt Vernon E2i
      • Mt Vernon
      • Santa Fe B
      • Santa Fe MBK
      • Santa Fe
      • Santa Fe-C INS
      • Trekker Insert
      • Trekker

      Technical Specs

      RPM 2.4
      Direction Normally CW
      Volts 115/120
      Shaft 1/4"
      Connector 3 Pin Molex

      Instructions

      Assembly Instructions For Quadra-Fire Auger Feed Motor Only with Bracket (2.4 RPM): 812-4421

      This motor runs on line voltage which will be roughly 115v. The yellow square mounted to the motor assembly is a capacitor, which is used to flip the polarity of the motor if the motor is under strain from a jam. If this happens, the motor will temporarily reverse the spin the auger, freeing the jam, when the capacitor cools, the polarity will be restored to the correct direction and feeding will resume.

      If your stove is not feeding but the motor is turning, you may be turning backwards.

      • the capacitor will reverse polarity if the heat from the stove is warming the capacitor. Make sure the wires are hanging from the proper mounts and not hanging on top of the exhaust blower.
      • When testing the auger, there MUST be at least 1lb of pellets in the hopper to close the pressure switch under normal conditions

      If your stove will not feed:

      1. Unplug the appliance, remove the control box, re-install the control box, and plug the appliance back in. A blue light should blink once to six times. Verify these blinks against your stove and set the program accordingly. See Control Box Programming.
      2. Turn on stove, verify the exhaust blower is "ON"
      3. Turn on the thermostat - the thermostat indicator light should come on and feed cycle should start.
      4. If the feed system does not come on: – Check the vacuum switch – Check the hopper switch (if equipped) - Check the wire harness – Replace #2 snap disc.

      Troubleshooting

      This motor runs on line voltage which will be roughly 115v. The yellow square mounted to the motor assembly is a capacitor, which is used to flip the polarity of the motor if the motor is under strain from a jam. If this happens, the motor will temporarily reverse the spin the auger, freeing the jam, when the capacitor cools, the polarity will be restored to the correct direction and feeding will resume.

      If your stove is not feeding but the motor is turning, you may be turning backwards.

      • the capacitor will reverse polarity if the heat from the stove is warming the capacitor. Make sure the wires are hanging from the proper mounts and not hanging on top of the exhaust blower.
      • When testing the auger, there MUST be at least 1lb of pellets in the hopper to close the pressure switch under normal conditions

      Warranty

      Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

      Shipping Info

      This Item Qualifies For Free Shipping!

      When Will My Order Ship?

      All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

      Do You Offer Express Shipping?

      Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

      How Does Free Shipping Work?

      Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

      Do You Ship To Canada?

      We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

      Do You Ship To Alaska Or Hawaii?

      We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

      Do You Ship Outside The US Or Canada?

      Unfortunately, at this time we do not offer international shipping other than to Canada.

      Shipping Time Estimations

      For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

      Learn More About Our Shipping Information

      Customer Reviews

      Based on 15 reviews
      100%
      (15)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      j
      john H.
      what can you say it works great

      It works great.

      J
      John H.
      Auger motor

      Part was exact replacement
      Got it in 2 days 👍👍10 stars

      L
      Larry Y.
      Fantastic

      Working great didn’t get next day delivery but weather was good, got it first thing on Monday. I’m very satisfied with the service.

      D
      Deena B.
      exact fit

      Shipping was super fast coming from Maine to Wash.st. Proper fit first time out. Thanks for keeping my house warm this Winter!

      G
      Gaylord S.
      Auger Feed Motor

      Order arrived in timely fashion. Very easy to "see" how to install, directions not very helpful. Worked great and at a cost of almost half of what I have paid for one from our local stove store.

      QUESTIONS & ANSWERS

      If your question does not concern this specific product, use our contact form
      Ask a Question
      • Is this for a classic bay 1200 free standing stove?

        If your Quadrafire Classic Bay 1200 FS is manufactured between 3/1/1997 - 2/25/2005 then, Yes, this is the correct replacement for the auger feed motor for that unit.

      • Hello will this fit I have a serial number of 00701206350 thx

        this is the auger motor for all Castile, Contour, Sante Fe and CB1200

      • How many bolts or screws hold this feeder motor in place? How long is the estimated time to replace? Is this part in stock, ready to ship? Any other info you can offer would be appreciated. Thanks, Kevin

        This part is used in a variety of different stoves. It takes about 30-45 minutes to replace this motor on inserts. A bit less time on freestanding stoves. On most Quadrafire stoves the feed assembly is held in by two Phillips head screws, the CB1200 uses two hex bolts. The motor itself is held on to a bracket in all feed assemblies by four Phillips screws.

      • What about the 1200 built before 03/97

        All 1200's

      • I have Quadra fire CB1200 and I need a auger motor parts # 7000-500.

        According to the manual for the Quadrafire CB1200 Pellet Stove, ending manufacture date 2/25/2005 you will need part 812-4421 if you are looking to replace the auger motor for this unit.

      Customer Reviews

      Based on 15 reviews
      100%
      (15)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      j
      john H.
      what can you say it works great

      It works great.

      J
      John H.
      Auger motor

      Part was exact replacement
      Got it in 2 days 👍👍10 stars

      L
      Larry Y.
      Fantastic

      Working great didn’t get next day delivery but weather was good, got it first thing on Monday. I’m very satisfied with the service.

      D
      Deena B.
      exact fit

      Shipping was super fast coming from Maine to Wash.st. Proper fit first time out. Thanks for keeping my house warm this Winter!

      G
      Gaylord S.
      Auger Feed Motor

      Order arrived in timely fashion. Very easy to "see" how to install, directions not very helpful. Worked great and at a cost of almost half of what I have paid for one from our local stove store.