Quadra-Fire 2.4 RPM Auger Feed Motor Only with Bracket, 812-4421

QuadraFire 2.4 RPM feed motor for most pellet stoves and inserts. This part is commonly called an auger motor. Includes the motor, mounting bracket, capacitor bypass wire adaptor (for use on some models made prior to 2006), and instructions.

Older Models made prior to 2006

• The mounting bracket fits all Quadra-Fire models made after 2011.
• Some Classic Bay CB1200 and CB1200i Inserts may require using the stove's existing bracket.
• Castile Inserts made prior to 2011 use a specific motor bracket that has been discontinued. This motor will mount on the old bracket. Over the years, it's possible that mismatched parts were installed or omitted in the feed assembly for these units. If you have a Castile Insert from this time period we highly suggest buying an updated full assembly to avoid compatibility issues.
• CB1200 and Contour, and Mt Vernon (OM) models still using the gray, opaque control boxes may require the use of the adapter bypass wire included with this motor. If your motor can plug into the existing wiring connection the adapter is not used.

Note: The Edge60 Built-in and the Mt Vernon AE Pellet Stove/ Insert use a 12 volt auger feed motor, SRV7000-313.

Complete Quadra-Fire Feed Assemblies with 812-4421 Motor:

• Castile FS (All models) - 812-4760
• Castile Insert (2002-March 2011) - SRV414-5400
• Castile Insert-B, Castile Insert-C (February 2011-May 2019) - 812-4760
• Classic Bay CB1200, Classic Bay CB1200i Insert - (All models) - 812-3690
• Santa-Fe, Santa-Fe Insert - (All models) - 812-4760
• Contour - (All Models) - 812-4760
• Mt Vernon Stove (OM) (2003-2006) - 812-4760
• Mt Vernon E2, Mt Vernon E2 Insert - (All models) - SRV7080-010
• Trekker, Trekker Insert - (2018-Current) - SRV7080-010
• Quadra-Fire CAB50-C - (2019-Current) - SRV7058-007

Complete Quadra-Fire Feed Assemblies with SRV7000-313 Motor:

• Edge60 - (2009-2012) - SRV7034-004
• Mt Vernon AE, Mt Vernon AE Insert - (2006-2019) - SRV7034-004

• 812-4421
• 812-4420
• 7000-004
• 12-1020
• PH-4421

Need to upgrade or replace your wiring & connectors?

Shop for connectors, adapters, service tools, and more. Shop now

Compatible Models

This motor runs on line voltage which will be roughly 115v. The yellow square mounted to the motor assembly is a capacitor, which is used to flip the polarity of the motor if the motor is under strain from a jam. If this happens, the motor will temporarily reverse the spin the auger, freeing the jam, when the capacitor cools, the polarity will be restored to the correct direction and feeding will resume.

If your stove is not feeding but the motor is turning, you may be turning backwards.

• the capacitor will reverse polarity if the heat from the stove is warming the capacitor. Make sure the wires are hanging from the proper mounts and not hanging on top of the exhaust blower.
• When testing the auger, there MUST be at least 1lb of pellets in the hopper to close the pressure switch under normal conditions

If your stove will not feed:

1. Unplug the appliance, remove the control box, re-install the control box, and plug the appliance back in. A blue light should blink once to six times. Verify these blinks against your stove and set the program accordingly. See Control Box Programming.
2. Turn on stove, verify the exhaust blower is "ON"
3. Turn on the thermostat - the thermostat indicator light should come on and feed cycle should start.
4. If the feed system does not come on: – Check the vacuum switch – Check the hopper switch (if equipped) - Check the wire harness – Replace #2 snap disc.

• Instructions for Quadra-Fire 2.4 RPM Auger Feed Motor Only with Bracket, 812-4421

This motor runs on line voltage which will be roughly 115v. The yellow square mounted to the motor assembly is a capacitor, which is used to flip the polarity of the motor if the motor is under strain from a jam. If this happens, the motor will temporarily reverse the spin the auger, freeing the jam, when the capacitor cools, the polarity will be restored to the correct direction and feeding will resume.

If your stove is not feeding but the motor is turning, you may be turning backwards.

• the capacitor will reverse polarity if the heat from the stove is warming the capacitor. Make sure the wires are hanging from the proper mounts and not hanging on top of the exhaust blower.
• When testing the auger, there MUST be at least 1lb of pellets in the hopper to close the pressure switch under normal conditions

When Will My Order Ship

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 1PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Is Expedited Shipping Available?

We offer both overnight and two day air shipping services for all orders placed within the Continental United States. For information on shipping cut-off times, go to our shipping page.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.