Harman Pellet Stove Parts Furnace/Boiler Systems

Harman 306 Watt Igniter.  Compatible with most automatic ignition Harman units. The ignitor works by super heating the air that passes through the ...

This 5" combustion blower fan blade is a double-sided impeller that is used on most freestanding Harman Pellet Stoves. Check out the compatible sto...

Replacement Burn Pot and Tailpipe Gasket for Harman Stoves. This item contains one gasket for the exhaust tailpipe and one gasket for the burnpot. ...

This exhaust blower motor is extremely durable and is used on most steel and cast iron Harman pellet stoves.  Some pellet stoves had an older versi...

This 5" combustion blower fan blade is a double-sided impeller that is used on most freestanding Harman Pellet Stoves. Includes a set screw for mou...

Harman Pellet Stove Flame Guide (Measurements: 7" x 3-3/4" x 4"). The flame guide helps to protect your stove by acting as a buffer between the fla...

Harman 306 Watt igniter.  Compatible with most automatic ignition Harman units *(Not compatible with units using the pressurized ignition system)* ...

Harman Pellet Stove Flame Guide. The flame guide helps to protect your stove by acting as a buffer between the flame and rear panel of the unit. Th...

Harman Pellet Stove OEM Flame Guide. The flame guide helps to protect your stove by acting as a buffer between the flame and interior of the unit. ...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

This knob and post set is compatible with all Harman pellet stoves, boilers, and furnaces that do not have a touchscreen controller. Every applicat...

Harman Pellet Stove Burn Pot Gasket. Part: 1-00-07381. (Burn Pot Gasket Only). The burn pot gasket fits between the burn pot and the body of the st...

Harman Pellet Stove Flame Guide (Measurements:  7" x 3-3/4" x 4"). The flame guide helps to protect your stove by acting as a buffer between the fl...

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sy...

Harman Pellet Stove Igniter & Cradle Kit.  This kit contains the most recently designed ignitor and cradle from Harman.  This cradle & igni...

Replacement Tailpipe Gasket for Harman Stoves. This is the gasket that seals the stove to the appliance collar (tailpipe) that connects to the vent...

This is a flat braided gasket that is 1/4" wide and 7.5' long with an adhesive backing. Harman uses this gasket to create an air seal between the d...

Ceramic plate overfire replacement gasket for Harman pellet stoves, inserts, and boilers that utilize a burn pot with primary air inlets that over ...

This 6 Amp, 30mm, control board fuse is located on the backside of your Harman Stove Circuit board. Most controllers, Revisions A-D, which were use...

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sys...

This bearing is part of the Harman feed system. It goes on the armature that turns the auger.

This Harman Pellet Stove Hopper Lid Gasket is compatible with all Harman stoves and inserts that have a glass hopper lid and the 60 Series HHT Boil...

Replacement 1/4-20 X 5/8 thumb screw / wingscrew for Harman stoves. Used on most pellet stoves to hold the cleanout cover on the burnpot. Each stov...

Harman Pellet Stove Ignitor & Updated Cradle. This is the most recent design from Harman.  This cradle can be used anywhere a finned igniter is...

Replacement Harman Black Exhaust Sensing Probe (ESP) for select pellet stoves. A 3 blink error code means that the control board has not detected t...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please ...

This latch expands when latched down to hold the hopper lid closed while making an air-tight seal. Used on many pellet stoves, coal stokers, furnac...

This is a flat braided gasket that is 1/4" wide and 15' long with an adhesive backing. Harman uses this gasket to create an air seal between the do...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

This 1" flat gasket is used for the following applications: Invincible and Accentra Inserts - mounted on the rack rails to reduce friction when s...

Harman 450 Watt Igniter for units with pressurized ignition, to include: PC45, HF60, PF100, and PB1050. This part was formerly known as 3-20-00450.  

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Harman 5" Single Paddle Impeller This stove part fits many Harman stove models. See the "Compatible Stoves" tab for details The Harman Combustion/E...

Replacement fire brick for Harman wood stoves and the PF100 Pellet Furnace. Brick measures 12" x 6" x 1-1/4", which is larger than your average 9 x...

Please read this section and compare against your stove's serial number to be sure you are getting the correct part!    Some models had more than ...

Replacement Pyroceramic Glass for Harman P38, P43, PC45, and P61 Pellet Stoves and Magnum 44 Coal Stoker. Measures 9 1/2" high x 13 5/16" wide, wit...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please r...

This 6RPM clockwise (CW) auger feed motor is used on all Harman pellet furnaces and boilers and was adopted for use on the P68 pellet stove in 200...

This 5 Amp, 20mm control board fuse is located on the backside of your Harman Stove Circuit board. All units made after 2013, with controllers Revi...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Replacement hopper lid gasket for Harman Pellet and Coal Stoves. Measures 5 feet long with self-adhesive backing. This is also the gasket you want ...

Replacement Pyroceramic Glass for Harman P38, P43, PC45, and P61 Pellet Stoves and Magnum 44 Coal Stoker. Measures 9 1/2" high x 13 5/16" wide, wit...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

This 6RPM clockwise (CW) auger feed motor is used on all Harman pellet furnaces and boilers and was adopted for use on the P68 pellet stove in 2009...

Harman Room Sensor Probe Extension 14FT, 3-20-674101 This sensor can be used with Harman pellet stoves and inserts to lengthen the distance of the ...

This is the gasket that seals the Ultra air intake assembly to the feeder bodyweldment, for Harman pellet stoves.

Harman Replacement Hose For The Differential Pressure Sensor Switch Approximately 15"