All Harman Pellet Stove Repair and Replacement Parts

Silicone Gasket, 3 FL Oz. Includes "clip top" spout for easy application and a re-closeable cap. Adheres all types of gasket materials to airtight ...

This 306 Watt igniter is compatible with all automatic ignition Harman except those which use a pressurized ignition system. Note: This igniter w...

Anderol 465 Synthetic Bearing Oil We sell the Anderol synthetic bearing oil for Fasco and other pellet stove blower motors that require oil lubric...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

Replacement Burn Pot and Tailpipe Gasket for Harman Stoves. This item contains one gasket for the exhaust tailpipe and one gasket for the burnpot. ...

This 5" combustion blower fan blade is a double-sided impeller that is used on most freestanding Harman Pellet Stoves. Check out the compatible sto...

This 306 Watt igniter is compatible with all automatic ignition Harman stoves. Was formally a 15 Fin..works with all Harman models listed. View our...

This control board is compatible with all listed compatible models made prior to their updated version with touchscreens on the hopper lid. The Con...

Flame Guide For Harman Pellet Stoves Part # 3-00-08534. This flame guide Fits P61A, Accentra & Others as shown on the "Compatible Stoves" tab T...

This 5" combustion blower fan blade is a double-sided impeller that is used on most freestanding Harman Pellet Stoves. Check out the compatible sto...

This exhaust blower motor is extremely durable and is used on most steel and cast iron Harman pellet stoves.  Some pellet stoves had an older versi...

Rutland Conditioning Glass Cleaner 8oz Get your fireplace or insert glass sparkling clean with this 8oz bottle of Rutland conditioning glass cleane...

Replacement Harman Dual Side Distribution Blower made by Fasco. The distribution blower, also referred to as the convection or room air blower, blo...

This flame guide replacement part is compatible with the following Harman stoves: -Accentra Insert, XXV, P35i, P43, P68, HF60, 52i, P43, Absolute43...

Replacement distribution (convection) blower for Harman Pellet Stoves that use Part# 3-21-33647. This blower is mounted without a gasket in all app...

Flame Guide For Harman Pellet Stoves Part # 3-00-08534. This flame guide Fits P61A, Accentra & Others as shown on the "Compatible Stoves" tab. ...

This room-temperature sensor is required by all Harman pellet stoves and inserts to use the "Room Temp" or "Automatic" mode setting on older units ...

This knob and post set is compatible with all Harman pellet stoves, boilers, and furnaces that do not have a touchscreen controller. Every applicat...

Replacement Harman Black Exhaust Sensing Probe (ESP) for select pellet stoves. A 3 blink error code means that the control board has not detected t...

Harman Burn Pot Scraper for Harman Pellet Stoves, 2-00-773850 This burn pot scraper is used to scrape the ash and creosote from the Harman burn pot...

Replacement Flame Guide for Harman Stoves. Measurements: 6-1/4" to 3-1/2" x 4-1/8. Replaces Old Harman part number 3-00-674069. The flame guide is...

Replacement blower mounting screw for Harman stoves. These studs are used to attach the combustion blower to the blower mount. Three (3) of these s...

Replacement silicone docking gasket for all Harman pellet stove inserts. Older versions of this gasket were red in color, this is the replacement f...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sy...

This distribution blower is a replacement part for the Harman Accentra Inserts made from 2003-2012 & The Harman older Invincible Inserts. This ...

Harman Black ESP Probe Replaces part# 1-00-00744  Exhaust thermistor probe ESP, Black Wire *You must order the same color thermister probe as the...

One Replacement 1/4" screw post with washer. These are the screws that attach the glass hopper lid to the hinges. If you can hear a "whistle" from ...

This 4 3/4" combustion blower fan blade is the single-sided impeller that is used on the Harman Accentra Insert, P35i and P35i-C Insert, and the PF...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

This 6 Amp, 30mm, control board fuse is located on the backside of your Harman Stove Circuit board. Most controllers, Revisions A-D, which were use...

Harman Burn Pot Gasket, 1-00-07381 (Burn Pot Gasket Only) The burn pot gasket goes between the burn pot and the body of the stove and prevents comb...

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sys...

This "counter-clock-wise" 4 RPM Auger Feed Motor is used on the Accentra-Cast, Advance, and the XXV pellet stoves that have the indirect chain driv...

Replacement Tailpipe Gasket for Harman Stoves. This is the gasket that seals the stove to the appliance collar (tailpipe) that connects to the vent...

Replacement Grommet & Spacer for many Harman models. It is used on certain auger motors. This part needs to be replaced when the rubber becomes...

Replacement 1/4-20 X 5/8 thumb screw / wingscrew for Harman stoves. Used on most pellet stoves to hold the cleanout cover on the burnpot. Each stov...

This bearing is part of the Harman feed system. It goes on the armature that turns the auger.

This Harman Pellet Stove Hopper Lid Gasket is compatible with all Harman stoves and inserts that have a glass hopper lid and the 60 Series HHT Boil...

Harman Tadpole Gasket with Self-Adhesive is used on the door of the Harman Advance pellet stove after Post January 8, 2005. Advance models made pri...

This room-temperature sensor is required by all Harman pellet stoves and inserts to use the "Room Temp" or "Automatic" mode setting on older units...