Replacement feeder body weldment for Harman pellet stoves:
Accentra (Pre serial # 00840001)
Accentra Insert (Pre serial # 008240096)
Advance (Pre serial # 008360001)
P38 (Pre serial # 008080620)
P61 (Pre serial # 008085055) **Model Discontinued, became P61A**
P61A (Beginning 008085055 ending 008085803)
P68 (Pre serial # 008280309)
PF100 (Pre serial # 008350087)
XXV (Pre serial # 12871)
**Not for use with the Invincible Insert, Invincible RS, Invincible T, or Pellet Pro II, that feeder body is now obsolete.
If you are replacing your existing feeder body weldment with this part, please note the following: This feeder body weldment may require a different fines collection box cover than the one you have with your stove or insert. Note the placement of the wing nut on the image above, the wingnut is in the center of the cover. Most units will have this design.
In the picture below, note the relocation of the wingnut post at the bottom of the opening. Very few units were ever made using this redesign prior to the introduction of the smaller UL Feeder body weldments.
If the wingnut on your existing stove is located at the bottom of the fines box opening, you can order this weldment as a direct fit.
If the wingnut on your existing stove is located in the center of your fines box opening, you will need to purchase the 1-00-677150 Feeder Body Weldment Kit.
NOTES:
- *When a feeder body is replaced, the auger shaft assembly and the auger feed motor MUST also be replaced.
- **Auger shaft assembly, part # 3-50-00465 is the auger assembly used for all 1-10-677150 Feeder Bodies.
- ***XXV, Accentra-Cast (also called Accentra 2 in some manuals)and, the Advance used an indirect feed system. The original part # for all indirect feed systems (chain and sprocket) was part # 3-50-00365. This part # was updated in 2009 to part # 3-50-00565 to reflect the change to the re-designed direct drive UL feeder bodies. Auger Assembly, part # 3-50-00465 is the updated SKU.
Here is a list of all of the different motors that are paired with the 3-50-00465 auger shaft assembly:
- Accentra-Cast Freestanding - pre serial number: 008400001 | Auger Motor: 3-20-08752
- Advance - pre serial number: 0083600001 | Auger Motor: 3-20-08752
- XXV - pre serial number: 12871 | Auger Motor: 3-20-08752
- Accentra Insert - pre serial number: 008240096 | Auger Motor: 3-20-60906
- P38 - pre serial number: 008080620 | Auger Motor: 3-20-60906
- P61/P61A - pre serial number: 008085092 | Auger Motor: 3-20-60906
- P68 - pre serial number: 008280309 | Auger Motor: 3-20-60906
- PF100 Furnace - pre serial number: 008350087 | Auger Motor: 3-20-60906
Replacement For Part Number:
View Compatible Models
UPC: 652174615919
